![]() ![]() That goes double if you expect it to protect your PC from unwanted viewing or access. While Dynamic Lock works reasonably well and does what Microsoft says it’s supposed to, a little tweaking with Rivera’s tool is probably a good idea. Simply subtract the value at the point where you want the lock to kick in from the value you read when the phone is next to the PC (and drop the minus sign, as will most often be the case), and you’re good to go. A bit of twiddling with the values in the registry key value, and you’ll be ready to rock’n’roll. That number increases with the distance away from the PC, until the PC locks.Īs you move around the local space near your PC, you’ll get a pretty good sense of how far away you want to be before the PC lock engages. When the phone is right next to the PC, it shows 0db (full strength). At my house, the default setting meant that I had to walk all the way to the other side of the house, as far as I could get from my home office before the lock would engage. Rivera reports that he had to walk “halfway across the floorplan” of his apartment before the lock engages. Using the tool, you can determine how far away you have to walk before the PC locks down. Because he created a tool that measures this data, I was able to confirm his observations to be correct (here’s a link to download the tool, named draconyx.exe). ![]() He noted that the cut-off threshold for RSSI is somewhere around -10 decibels (dB). Rivera also observesthat this feature consumes power and will impact battery life on both devices when it’s running. Determines if the RSSI value dips below a certain threshold.Disconnects from the Bluetooth-paired phone.Retrieves the average Received Signal Strength Indication (RSSI) for that connection.Connects to the Bluetooth-paired phone.Rivera tested this facility and observed that it depends on an ongoing set of activities repeated multiple times per minute. Simply click the checkbox under the Dynamic Lock heading that reads “Allow Windows to detect when you’re away and automatically lock the device,” as shown in this screen snippet: Once pairing is complete, you can turn on Dynamic Lock by visiting Settings –> Accounts –> Sign-in options. When a phone is paired with a Windows 10 PC, an entry like the “iPhone” item shown above appears in Devices and Printers. To do this, open “Devices and Printers,” then click “Add a device.” Once the phone has been paired with your PC, you’ll see something like this under the “Devices” heading in this control panel widget (here, my iPhone is paired with my Dell Venue hybrid tablet PC). To begin, you must pair your phone with your Windows 10 PC. Thus, Dynamic Lock makes a dandy new security feature in Creators Update, one that most business users (or their IT departments) will find worth turning on and using. That is, if the phone you’ve paired with your PC (it works for laptops, notebooks, tablets and desktops) is not found within radio range of your PC, Windows 10 turns off the screen and locks the PC after 30 seconds have elapsed. It’s called Dynamic Lock, and lets you control access to your PCs based on how close they - and your Bluetooth-paired phones - are to them. When Microsoft released Build 15031 of the Windows 10 Insider Preview on February 8, 2017, it added a new OS feature for Bluetooth-equipped devices. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |